GF SIGNET3-2536轉子流量傳感器 美國GF signet3-2536-P2 蘭色帽子區分 低流速0.1~6m/s 方波信號輸出，抗干擾能力更強，傳輸距離更遠，多達200米 3-2536技術參數： 3-2536 流速范圍 0.1～6 m/s 管徑范圍 15～900（0.5～36in） 輸出信號 方波15Hz per ft/s，集電極開路NPN 重復性/線性度 /- 0.5% 滿刻度/1%滿刻度 溫度壓力 PP殼體 12.5bar@20℃1.7bar@90℃ PVDF殼體 14.0bar@20℃1.7bar@100℃ 葉輪/軸材料/ O形圈 PVDF/鈦、哈氏合金、PVDF/ FPM/EPDM 電纜規格 7.6m雙絞屏蔽電纜，長為200m 兼容二次表 3-8550、5500、5600、5075、8900 詳細英文介紹 2536 Rotor-X Paddlewheel Flow Sensors Simple to install with time-honoured reliable performance, Signet 2536 Rotor-X Paddlewheel Flow Sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. The Model 2536 has a process-ready open collector signal with a wide dynamic flow range of 0.1 to 6 m/s (0.3 to 20 ft/s). The sensor measures liquid flow rates in full pipes and can be used in low pressure systems. The Signet 2536 sensors are offered in a variety of materials for a wide range of pipe sizes and insertion configurations. The many material choices including PP and PVDF make this model highly versatile and chemically compatible with many liquid process solutions. Sensors can be installed in DN15 to DN900 (? to 36 in.) pipes using Signet's comprehensive line of custom fittings. These custom fittings, which include tees, saddles, and weldolets, seat the sensor to the proper insertion depth into the process flow. The sensors are also offered in configurations for wet-tap installation requirements. Online Catalog Fields of Application: Pure Water Production Filtration Systems Chemical Production Liquid Delivery Systems Pump Protection Scrubber Systems Water Monitoring Not suitable for gases Advantages: Flow rate range 0.1 to 6 m/s (0.3 to 20 ft/s) Wide Turndown Ratio of 66:1 Open-collector output Installs into pipe sizes DN15 to DN900 (? to 36 in.) High resolution and noise immunity 7.6 m (25 ft) of cable for standard and Wet-Tap sensors Chemically resistant materials Easy to replace rotor Standards: CE approved RoHS compliant