南京尼龍?jiān)鷰S(chǎng)家直接銷售 生產批發 自鎖式尼龍?jiān)鷰?材質：采用UL認可之尼龍料制成，防火等級94V-2，耐酸、耐蝕、絕緣性良好，不易老化，承受力強。 操作溫度：-40℃至85℃ 顏色：標準顏色為本色（白色），另有抗紫外線之黑色，特殊顏色歡迎訂做。 Self-locking Nylon cable tie Meter:Nylon 66,94V-2 certificated by UL. Heatesisting,erosion control,insulate well and not apt to age. Operating temperature: -40 to85 Color: Naturl(or white,standard color), UV black and other color are available as requested. XLS-2.5X80MM 2.5X100MM 2.5X120MM 2.5X150MM 2.5X160MM 2.5X200MM 3.6X150MM 3.6X180MM 3.6X200MM 3.6X250 3.6X280MM 3.6X300MM 3.6X370MM 4.8X120MM 4.8X250MM 4.8X280MM 4.8X300MM 4.8X350MM 4.8X380MM 4.8X400MM 4.8X430MM 4.8X450MM 4.8X500MM 7.2X150MM 7.2X200MM 7.2X250MM 7.2X300MM 7.2X350MM 7.2X400MM 7.2X450MM 7.2X500MM 7.2X550MM 9.0X400MM 9.0X450MM 9.0X500MM 9.0X550MM 9.0X600MM 9.0X650MM 9.0X700MM 9.0X760MM 9.0X800MM 9.0X900MM 12X500MM 12X650MM 固定頭式尼龍?jiān)鷰?材質：UL認可之尼龍66料制成 特點：扎帶捆孔電線后，將整束電線用螺釘固定于基板上。 Material: Nylon 66 certificated by UL Usage: after bunding wires, fis them on plate with screw. 標牌式尼龍?jiān)鷰?材質：采用UL認可之尼龍66料制成，防火等級94V-2，耐酸蝕，不易老化。 特點：扎帶前端沒有空白標牌，可用筆在上面標志記號。 Material: Nylon66 94V-2 certificated by UL. Acid-control and not easy to age. Usage: No blank tag at the entrance of cable tie,then write down the marker on the tag. 插銷式尼龍?jiān)鷰?材質：采用UL認可之尼龍66料制成，防火等級94V-2，耐酸，耐蝕，絕緣性良好、不易老化，承受力特強。 使用方法：先將機板鉆孔，然后把扎帶插入也內，再將電線扎即可。 Push mount tie Material: Nylon 66,94V-2, cetificated by UL.Acid and corrode resisting, insulate,not to age. Usage: insert tie the hole of table and tighten it. 可松式尼龍?jiān)鷰?材質：UL認可之尼66料制成 特點：可以松開重復使用 Releasabie ties Material: cetificated by UL nylon66 Character: releasabie