產品分類 更多>>
角座閥技術參數：
Technical Data of Angle Seat Valve:
公稱壓力：PN 1.6 2.5 Mpa
Nominal Pressure: PN 1.6 2.5Mpa
控制壓力：（DN08~DN50）1.9~10bar
（DN65~DN100）4.0~12bar
Control Pressure:（DN08~DN50）1.9~10bar
（DN65~DN100）4.0~12bar
控制介質：中性氣體或空氣
Control Medium: Neutral gas, Air
適用溫度：普通型：-20~180℃
高溫型：-20~320℃
Applicable Temperature: Normal Temperature: -20~180℃
High Temperature: -20~320℃
適用介質：水、酒精、油、燃料、蒸汽、中性氣體或液體、有機溶劑、酸堿溶液。
Applicable Medium: Water, Alcohol, Oil, Fuel, Steam, Neutral gas or liquid, Organic solvent, Acid and Lye
控制形式：常閉型、常開型、雙作用型。
Control Type: Normally Closed, Normally Open, Double Acting
連接方式：螺紋：內螺紋、外螺紋、活接頭（螺紋種類：G/BSP/BSPT/PT/NPT）
法蘭：國標法蘭、德標法蘭、美標法蘭
焊接：對焊、承插焊
Connection Ended: Thread Ended: Female Thread, Outside Screw, Screw Connector
( Thread Standard: G/BSP/BSPT/PT/NPT )
Flanged Ended: GB, DIN, ANSI
Welded Ended: Butt Welded, Socket Welded
特點：Advantages:
1、可視位置指示：可接限位開關或緊急手動裝置。
1. Seeable Location Indicator: Be able to access the limit switches and handwheel
2、容易安裝：氣控頭可以作360°旋轉，甚至限位開關也可以360°旋轉?？煞奖愕匕惭b一到二個限位開關。
2. Easy to install: Pneumatic actuators and limit switches can be made into rotation in any 360-degree; easy to install one and two limit switches
3、先進的氣動控制器：加厚工程塑料外殼，安全。低磨損的活塞結構，容量大而低耗氣量。內部元件自潤滑，免維護。
3. Advanced pneumatic actuator: using thicken Engineering plastics shell to insure valve safty; low wear and tear by the piston structure; high capacity and low air consumption; internal components is self-lubricating and maintenance-free.
4、容易連接：MAMUR標準連接，嵌入式金屬接頭。可選更小的控制頭。
4. Easy to connect: MAMUR standard connection and inbuilt metal connector are suitable for smaller size actuator
5、長壽命導桿：閥桿契形特氟?。≒TEE）密封，避免臟物導入。自潤滑，免維護。閥桿經特別處理以確保固定，并能自動校正位置。
5. Long life steam: valve steam uses wedge-shaped PTFE to avoid the dirty; steam are self-lubricating and maintenance-free; after special processing,
