FEATURES: ? The surface of the bedways is supersonic frequency. 表面經過淬火處理 ? The spindle bore size is 105mm. 主軸孔徑105mm ? the spindle system is high in rigitidy and accuracy 主軸鋼性好 穩定性高 ? There is no need for change gears. 沒有改變齒輪的需要 ? The machine can turn about 89 kinds of metric,Inch,Module and D.P.I.threads.. 本機可以把約89公制，英制，模數 ? An automatic stopping device is used to realize automatic stop for the machining of a place of a certain length. 自動停車裝置是用來實現一個有一定長度的地方加工自動停止 ? One-piece iron casting base allows heavier cuts. 單件重鐵鑄造基地允許削減 SPECIFICATION:規格： Model No.型號 Distance between centers較大工件加工長度 1000/1500/2000/3000mm Swing over bed床身上較大回轉直徑 660mm Swing over carriage刀架上較大回轉直徑 420mm Swing over gap馬鞍上較大回轉直徑 870mm Spindle bore主軸孔徑 105mm Taper of spindle bore主軸錐孔 113mm(1:20) Spindle nose主軸鼻端 D1~8 Number of spindle speeds主軸轉速級數 12 Range of spindle speeds主軸轉速范圍 36~1600rpm Range of cross feeds橫向進給量 0.027-1.07mm/r Range of longitudinal feeds縱向進給量范圍 0.063-2.52mm/r Range of inch threads車削英制螺紋 28-1/8~46T.PI/25 Range of metric threads公制螺紋范圍 1-14mm/22 Range of DP threads DP 系列線程 4~56D.P./24 Range of module threads范圍模塊線程 0.5~7mm/18 Rapid feed of cross traverse橫向交叉的快速進給 1.9mm/min Rapid feed of longitudinal traverse飼料快速縱向穿越 4.5mm/min Top Slide travel小刀架較大行程 145mm Cross slide travel後副滑板行程 310mm Max.馬克斯。 size of tool(W x H)刀具尺寸（寬x高） 25 x 25 mm Tailstock quill dia.尾座鵝毛筆直徑。 75mm Tailstock quill travel尾架套筒行程 150mm Taper of tailstock quill尾架套筒錐度 MT5 Motor馬達 7.5KW Packing size包裝尺寸 2500/3000/3500/4500 x 1100 x1650mm Net weight凈重 2500/2700/3000/3350kgs STANDARD ACCESSORIES 標準配件 OPTIONAL ACCESSORIES 可選配件 Three-jaw chuck三爪卡盤 1個 Face plate面板 1個 Four-jaw chunck四爪chunck 1個 Driver plate驅動板 1個 Steady rest /Follow rest穩態休息/后續休息 1套 Toolbox