ANAHEIM螺桿驅動表LS500-12-H-N-00-N • Travel Options: 12 or 18 Inches • Accuracy: 0.003 Inches • Speed: Up to 12 Inches Per Sec. • Supported Rails, Low-Profile Design • Heavy Duty Applications, Up to 225 lbs. • Motor and Encoder and Cable Options • One and two-axis configurations (see Ordering Information for full part number) The LS500 Series is a Screw Driven Table that is a comprised of heavy duty linear guides with hardened rails and precision bearing blocks, a precision ground screw, and a zero-backlash nut. This series is ideal for medium to heavy-duty application under 8,000 pounds, with accuracy requirements within 0.003¨ per foot, and speed ranges up to 12 inches per second. American Made - designed and built in the USA! Table prices start at $1,250.00, (12 inch travel, no options selected). The LS500 series is available with Open-Loop or Closed- Loop (assembled with encoders), Homing and End Limit switch options, as well as a variety of lead screw, stepper motor, and encoder choices, with travel length up to 18 inches.