marsh bellofram微型調(diào)壓閥T91 marsh bellofram微型調(diào)壓閥 Type 91 Miniature Regulators Type 91 Miniature Regulators Designed for applications with limited space and for low flow or dead end service Small package size and lightweight construction Standard or low bleed versions available Corrosion resistant anodized aluminum exterior Excellent stability and repeatability Self relieving Low cost Product Detail: Type 91 The Type 91 Subminiature Regulator is a compact, low-cost unit which operates in pressure ranges up to 100 psi , with a maximum supply pressure of 250 psi. It provides dependable reliability and accuracy for low flow or dead end applications, but is not designed for critical flow applications. The Type 91 subminiature regulator is available with a corrosion resistant anodized aluminum body and bonnet or with a brass body and bonnet. Both come standard with a fluorocarbon diaphragm. Type 91 Low Bleed The Type 91 low bleed version is designed for applications where low air consumption is required. The Type 91 is ideal for applications where space is limited and for dead ended/low flow service. Such applications include ink control on printing presses, panel loading applications, hand-held analyzers and calibration equipment, small cylinder operations, and all types of instrumentation applications. It can be through panel mounted or, due to its lightweight, pipe mounted. A slotted adjustment screw is available for precision control. Part Numbers: Part Number Port Size (NPT) Set Point Range BAR psig T91 960-240-000 1/16¨ NPT 0-0.3 0-5 960-236-000 0-1.0 0-15 960-237-000 0-2.1 0-30 960-238-000 0-4.1 0-60 960-239-000 0-6.9 0-100 T91 962-036-000 5mm 0-0.3 0-5 962-083-000 0-1.0 0-15 962-033-000 0-2.1 0-30 962-034-000 0-4.1 0-60 962-035-000 0-6.9 0-100 Options: Replace the last three digits of the part number with digits from the table below. If more