耐火泥說明書

耐火泥由耐火粉料、結合劑和外加劑組成。幾乎所有的耐火原料都可以制成用來配制耐火泥所用的粉料。以耐火熟料粉加適量可塑黏土作結合劑和可塑劑而制成的稱普通耐火泥，其常溫強度較低，高溫下形成陶瓷結合才具有較高強度。以水硬性、氣硬性或熱硬性結合材料作為結合劑的稱化學結合耐火泥，在低于形成陶瓷結合溫度之前即產生一定的化學反應而硬化。耐火泥的粒度根據使用要求而異，其極限粒度一般小于1mm，有的小于0.5mm或更細。選用耐火泥漿的材質，應考慮與砌體的耐火制品的材質一致。耐火泥除作砌縫材料外，也可以采用涂抹法或噴射法用作襯體的保護涂層。

Refractory clay by refractory powder, binder and additive composition. Almost all of the refractory raw material can be made to powder made of refractory clay used for refractory clinker powder. Adding plastic clay as bonding agent and plasticizer made of ordinary refractory clay, the normal temperature strength is low, high temperature ceramic forming with a higher strength. Water hardness, gas rigid or hot hard binding materials as bonding agent called chemically bonded refractory clay, below the ceramic forming with temperature before that produce certain chemical reaction and hardening. Refractory clay particle size according to the use requirements vary, the limit size generally less than 1mm, some less than 0.5mm or more fine selection of refractory. The mud material should be considered, and masonry of refractory products in the material of refractory clay. Except for Qifeng material outside, also can use daub or spray method used for lining body protection coating.

1、可塑性好，施工方便；Good plasticity, convenient construction;

2、粘結強度大，抗蝕能力強；Strong bonding strength, strong corrosion resistance;

3、耐火度高較，可達1650℃